User's Manual

Quick Installation Guide Installation
deliberant Page 12
Step 9. Power-up the unit. The green LAN LED must be on (refer at the respective section
LEDs). Depending on link quality, up to three yellow LEDs will switch on, indicating that
link between two units was established successfully.
Step 10. After the link was established, align antenna for the maximum performance. Run the
Antenna Alignment tool in the Web management interface and move the antenna in
the horizontal and vertical panes until the maximum RSSI visible on the Antenna
Alignment graph is achieved. After the maximum RSSI level is reached, tighten down
the unit’s U bolts in the optimal position.
Avoid standing directly in front of an operating antenna while aligning.