User's Manual

Quick Installation Guide Access the APC 2S-20

deliberant Page 13

Access the APC 2S-20

The first connection to the APC 2S-20 can be made using a standard Ethernet cable connected

directly to your PC. See next sections for the instructions on how to access the APC 2S-20

management interfaces.

Connection via WEB Browser

The default IP address of the APC 2S-20 is 192.168.2.66 with a subnet mask of 255.255.255.0.

Step 1. Configure your PC with a static IP address on the 192.168.2.0 subnet with mask

255.255.255.0. Connect the APC 2S-20 Ethernet interface in to the same physical

network as your PC. Open the Web browser and type the default IP address of the

APC 2S-20: http://192.168.2.66/

Step 2. Enter the APC 2S-20 administrator login details to access the Web management:

The default administrator login settings for all APC 2S-20 are:

Password: admin01

Step 3. After successful administrator log in you will see the main page of the APC 2S-20 Web

management interface. The APC 2S-20 now is ready for configuration. For further

instructions on Web management refer to the respective document APC 2S-20 User

Guide.