30dBi antenna professional installation instructions 1 Technical Parameters 30dbi antenna mainly apply to outdoor application scenarios， connect to outdoor AP 5GHz RF port by using a N type connector. Fig.
Chart 1-1 Technical Parameters Below is the far-field pattern in horizontal direction and in vertical direction.
2 Safety Precautions Warning! Antenna installation is dangerous to some extent, please read over the below safety precautions before installation, so to avoid unnecessary injuries and deaths. Please set the antenna location far away from electricity such as power supply wire, street lamp or power supply box. Installer must pay attention not to touch the power supply wire, otherwise it may cause severe casualty. To choose a safe location where get far away from the power line or other cable.
Proper location to install 30dbi antenna. 30dbi antenna mainly used in outdoor such as top of building or top of the mountain. Generally speaking, the higher it be, the more area it will cover, so the more effective it will be. 5 Antenna Installation 30dbi antenna is packed with all kinds of spare parts, while other tools such as monkey wrench, cross screw driver and “-”type screw driver need to be prepared by yourself. 5.
of cable should be as shorter as it can be, so to avoid unnecessary wastage. 5.3 Antenna installing steps. Step 1 Part 1 and part 2 assembly first, Parts with a nut fixed tightly. Step 2 The module connected to the part 3. Step 3 Part 4 and part 5 connection dishes. Step 4 Use of part 6, 7, 8, 9 fixed dishes with parts Step 5 The parts 10, 11, 12, 13 fixed the antenna .The fixed link The fixed rod through the U between code ring. Nut and tighten, tighten the antenna on the fixed link.
Antenna Power-level Setting This document provides mandatory radio power-level settings that must be configured to ensure that your device complies with regulatory requirements in your region. 6.1 Radio power-level setting 1.LOGIN he default product address is 192.168.2.66.
2 Radio Power Tx Power（dBm）:30dBi 3 Different Frequency of the power setting 5150-5250MHZ:4dBi
5725-5850MHZ:20dBi
4 Select save and apply Click on the Save changes and apply.
