User Instructions

of cable should be as shorter as it can be, so to avoid
unnecessary wastage.
5.3 Antenna installing steps.


Mounting the LigoPTP 5-23 PRO
Mounting bracket of LigoPTP 5-23 PRO unit is designed to make installation
on a wall or a pipe easy. The unit is attached and its position is fixed
with the single bolt.
Mounting on a Pole
The PTP units are supplied with mounting hardware for pole with diameters
in the range 10mm to 70mm installations. Follow the steps for LigoPTP 5-23
PRO installation on a pole:
Step 1. Make sure that the unit is powered-off.
Step 2. Ground the unit. The unit must be properly grounded to protect