User Instructions

Figure 1 – Antenna Alignment Tool on Web
Figure 2 – Antenna Alignment Tool on OLED
Step 7. After the maximal RSSI is reached, tighten the unit’s bracket
in the optimum position.
Mounting on a Wall
The mounting bolts for unit installation on the wall are not included
in the package.
For mounting LigoPTP 5-23 PRO unit on the wall, first mount one half of
the bracket to the wall and then connect the two halves of the bracket
together and tighten the nut and bolt.
Step 1. Make sure that the unit is powered-off.
Step 2. Ground the LigoPTP 5-23 PRO unit. The unit must be properly
grounded to protect against lightning. The grounding wire must be attached
to the grounding stud on the unit.
Step 3. Dismantle mounting bracket into the two parts for easier
attachment to the wall: