User Instructions

It is recommended not to tighten the units to its mounting brackets until
the alignment process of the antenna is complete.
Step 7. Power-up the LigoPTP 5-23 PRO unit.
It is recommended to use shielded Ethernet cable to reduce exposure of
the electromagnetic noise.
Step 8. Run the Antenna Alignment tool on Web management interface
( Figure 1 – Antenna Alignment Tool on Web) or on OLED screen ( Figure 2 –
Antenna Alignment Tool on OLED ) and move the antenna in the horizontal
and vertical planes until the maximum RSSI visible on the Antenna
Alignment graph is achieved.
Avoid standing directly in front of an operating antenna while
aligning.
Step 9. After the maximal RSSI is reached, tighten the unit’s bracket
in the optimum position.
6 Antenna Power-level Setting
This document provides mandatory radio power-level settings
that must be configured to ensure that your device complies with
regulatory requirements in your region.
6.1 Radio power-level setting
1.LOGIN
he default product address is 192.168.2.66.
The default administrator login settings are:
User：admin
Password：admin01