5dBi antenna professional installation instructions 1 Technical Parameters 15dbi antenna mainly apply to outdoor application scenarios， connect to outdoor AP 5GHz RF port by using a SMA type connector. Fig.1-1 15dbi antenna appearing diagram.
Chart 1-1 Technical Parameters
Below is the far-field pattern in horizontal direction and in vertical direction. 2 Safety Precautions Warning! Antenna installation is dangerous to some extent, please read over the below safety precautions before installation, so to avoid unnecessary injuries and deaths. Please set the antenna location far away from electricity such as power supply wire, street lamp or power supply box. Installer must pay attention not to touch the power supply wire, otherwise it may cause severe casualty.
Must pay attention to: Do not use metal ladder；Not to install in wet or wind weather, in the mean time, isolative cloths, shoes and glove must be wear-on by installer. If the antenna, RF cable or other spare parts falling from the high place, please elude as quickly as you can, so as to avoid unnecessary injury and deaths. When the antenna need to power up, please let the professional to do it, do not connect by yourself. Any emergency such as electric shock must seek help at once.
Antenna Installation 15dbi antenna is packed with all kinds of spare parts, while other tools such as monkey wrench, cross screw driver and “-” type screw driver need to be prepared by yourself. 5.1 Installation Tools 1、monkey wrench 2、 “+”type screw driver and “-”type screw driver 5.2 RF cable requirements Generally we adopt the RF cable as short as possible. We suggest adopting high quality and low loss RF cable.
5.3 Antenna installing steps. 如图 1‐3 6 Antenna Power-level Setting This document provides mandatory radio power-level settings that must be configured to ensure that your device complies with regulatory requirements in your region.
6.1 Radio power-level setting 1.LOGIN he default product address is 192.168.2.66.
3 Different Frequency of the power setting 5150-5250MHZ:19dBi
5725-5850MHZ:26dBi 4 Select save and apply Click on the Save changes and apply.
