User's Manual

User Manual 
deliberant Page20

GeneralDeviceOperation
WebManagementStructure
The main web management menu is displayed after successfully login into the system (see the figure
below). From this menu all essential configuration pages are accessed. The active menu tab is
displayed in a different color:
Figure 7 – AP Web Management Menu
By default the Status | Information menu is activated where the main device information is displayed.
The APC web management menu has the following structure:
Status
Information – displays general information and of the device.
Network – displays network statistics of the device.
Wireless – displays information about connected stations on each wireless interface (only on AP
wireless mode).
Routes – displays unit’s route table.
ARP – displays ARP table.
Configuration
Network – to configure network mode, Ethernet speed, IP settings, management and data
VLANs, DHCP, PPPoE.