User's Manual

User Manual 
deliberant Page25

ARP
The ARP page displays the ARP (Address Resolution Protocol) table currently recorded on the device.
Use Refresh button to reload ARP table results.
Figure 12 – ARP Table Records
Configuration
Network
The Configuration | Network page allows you to control the network configuration and settings of the
device. First, the device operation mode must be defined to work as a bridge or router. The content of
the window varies depending on your selection:
Figure 13 – Network Mode Options
Network mode – choose the device operating mode [bridge/router]
 Bridge – in this mode the device works as transparent bridge interconnecting wireless
network and LAN port.
 Router – in this mode the device works as router between wireless network and all LAN
ports.
Network settings will vary according to the selected Network mode. The Bridge mode allows
configuring device LAN IP settings, while the Router mode requires more parameters such as LAN
network settings, WAN network settings, LAN DHCP settings.
BridgeMode
Port forwarding and Static routes are not available on Bridge mode.