User's Manual
User Manual
deliberant Page28
RouterMode
This section allows customizing parameters of the Router to suit the needs of network, including
ability to use the built-in DHCP server. When device is configured to operate as Router, the following
sections should be specified: WAN network settings, LAN network settings and LAN DHCP settings.
Figure 17 – Router Settings
Enable NAT – select to enable NAT (Network Address Translation), that functions by transforming the
private IP address of packets originating from hosts on your network so that they appear to be coming
from a single public IP address and by restoring the destination public IP address to the appropriate
private IP address for packets entering the private network, the multiple PCs on your network would
then appear as a single client to the WAN interface.
Ethernet speed – configures the Ethernet link speed and the duplex mode of the Ethernet port.
Choose "auto" for automatic detection of link speed and duplex mode.