User's Manual

User Manual 
deliberant Page40

Figure 36 – Security: Enterprise WPA/WPA2 Encryption
Encryption – choose WPA/WPA2 encryption type:
 AES – data encrypted with AES method;
 TKIP – data encrypted with TKIP method;
EAP method – choose EAP method:
 EAP-TTLS-MSCHAPv2
 PEAP/ MSCHAPv2
Identity – specify the identity of the authentication to the RADIUS server.
Password – specify the password of the authentication to the RADIUS server.
Identity and Password on the APC must match the identity and password running on the
RADIUS server's user list.
AdvancedWirelessSettings
Advanced parameters allow configuring the device to get the best performance/capacity of the link.
Figure 37 – Wireless Advanced Settings
Tx power – set the unit’s transmitting power at which the device will transmit data. The larger the
distance, the higher transmit power is required. To set transmit power level use the slider or enter the
value manually. When entering the transmit power value manually, the slider position will change
according to the entered value. The maximum transmit power level is limited to the allowed value by
country in which device is operating regulatory agency.
Enable ATPC – select to enable Automatic Transmit Power Control (ATPC). If enabled, device radio
will
continuously communicate with remote unit’s radio in order to adjust the optimal transmit power
automatically.