User's Manual
User Manual
deliberant Page53
Link location – displays the physical location of the device. This name has the same value as Device
location in the Device settings.
Contact information – specify the identification of the contact person for this managed device,
together with information on how to contact this person.
R/O community – specify the read-only community name for SNMP version 1 and version 2c. The
read-only community allows a manager to read values, but denies any attempt to change values.
R/O user – specify the user name for read-only SNMPv3 access. The read-only community allows a
manager to read values, but denies any attempt to change values.
R/O user password – specify the password for read-only SNMPv3 access [string].
Clock/NTP
Use this section to manage the system time and date on the device automatically, using the Network
Time Protocol (NTP), or manually, by setting the time and date on the device.
The NTP (Network Time Protocol) client synchronizes the clock of the device with the defined time
server. Choose NTP from the configuration menu, select your location time zone and enter NTP
server in order to use the NTP service.
Figure 56 – Device Clock: NTP Configuration
Configuration – choose the system clock configuration mode [NTP/Manual].
Timezone – select the timezone. Time zone should be specified as a difference between local time
and GMT time.
Save last known time – select to recall the timestamp that was saved on last reboot. When NTP is
enabled, this option will set system clock to last reboot time if no NTP servers are available.
NTP server – specify the trusted NTP server IP or hostname for synchronizing time with [IP address].
To adjust the clock settings manually, choose the configuration mode as Manual and specify the
following settings:
Figure 57 – Device Clock: Manual Configuration
Configuration – choose the system clock configuration mode [NTP/Manual].
Timezone – select the timezone. Time zone should be specified as a difference between local time
and GMT time.
Save last known time – select to recall the timestamp that was saved on last reboot.
Date – specify the new date value in format MM/DD/YYYY
Time – specify the time in format hh:mm.