User's Manual

User Manual 
deliberant Page54

SSH
Use this menu to manage access to the device via SSH port:
Figure 58 – SSH Port Configuration
Enabled – enable or disable SSH access to device.
Port – the SSH service port. By default SSH port is 22.
HTTP
Use this menu to control HTTP connection on device web management:
Figure 59 – HTTP Settings
Enable management through HTTP – select tis option to enable or disable HTTP access to the
device management.
Port – specify HTTP port. Standard HTTP port is 80.
HTTPS connection via the standard port 8080 is always enabled.
Autodiscovery
Autodiscovery function is available only on Station, Station WDS and IPoll Station
wireless modes.
Enable this feature to allow the APC unit discovery within reach of a single multicast packet.
Figure 60 – Device Autodiscovery
Enable device autodiscovery – select to enable Autodiscovery function.