User's Manual
User Manual
deliberant Page62
Traceroute
This tool is a route-tracing utility used to determine the path that an IP packet has taken to reach a
destination. This is useful when trying to find out why destination is unreachable, as you will be able to
see where the connection fails.
Figure 71 – Traceroute Results
Destination IP or Hostname – specify hostname or IP address of the target host.
Max Hops –Specifies the maximum number of hops to search for target.
Start/Stop – click to start or stop traceroute tool.
SpectrumAnalyzer
The Spectrum analyzer test displays detailed information about signal level of each APC unit’s
antenna on each available frequency. This enables administrator choose the best available
frequency/channel for the unit operation. The frequency list depends on the Country at which the unit
is operating, and chosen channel width.
Do not use the Spectrum analyzer on the remote unit of the link, as the connection to the
device will be lost during the test.