User Manual

Blackmagic Camera Utility
39
How to Update Your Camera Software on Mac OS X
After downloading the Blackmagic Camera Utility software and unzipping the downloaded file, open
the resulting disk image to reveal its contents.
Before launching the installer, we recommend first clicking the Uninstall Blackmagic Camera Utility
icon to remove any previously installed camera software from your computer. If you have no previously
installed camera software on your computer, launch the Blackmagic Camera Installer and follow the
onscreen instructions.
How to Update Your Camera Software on Windows
After downloading the Blackmagic Camera Utility software and unzipping the downloaded file,
you should see a Blackmagic Camera Utility folder containing this PDF manual and the Blackmagic
Camera Utility installer.
Double-click the installer and follow the onscreen prompts to complete the installation.
How to Update the Camera Software
After installing the latest Blackmagic Camera Utility on your computer, connect a USB cable between
the computer and the camera. On Pocket Cinema Camera, the Mini USB 2.0 port is located inside the
battery terminal. On Cinema Camera and Production Camera 4K, the Mini USB 2.0 port is located
behind the SSD door.
Launch the Blackmagic Camera Utility and follow any onscreen prompt to update the camera software.
The Mini-USB 2.0 port can be found behind the SSD door on
Cinema Camera and Production Camera 4K.
The Mini-USB 2.0 port can be found behind the battery
terminal door on Pocket Cinema Camera.