Installation guide

10 Chapter 3
Figure 10 Browse for image file
8. Click Browse.
Figure 11 Browse to select commandsXml.xml
9. Navigate to the Z90D_S 4GB_8GB WES7 Conversion Image folder (on your hard
drive) that contains the commandsXml.xml file (this is the location you selected in
"Step 1: Copy the Z90D_S 4GB_8GB WES7 Conversion Image Folder (on the
DVD-ROM) to Your Local Hard Drive"), click on the commandsXml.xml file to select it
(you may need to select the All Files option from the Files of Type box to display the
commandsXml.xml file for selection), and then click Open.
Caution
Be sure to use the commandsXml.xml file you extracted in "Step 1: Copy
the Z90D_S 4GB_8GB WES7 Conversion Image Folder (on the DVD-ROM)
to Your Local Hard Drive"; do not use the commandsXml.xml file directly
from the Conversion Software Assembly DVD-ROM.
10.In the browse dialog box, click Next to open the Prepare the USB Drive dialog box.