Laptop User Manual
Table Of Contents
- Dell Latitude 10 – ST2e Owner's Manual
- Working on Your Computer
- Removing and Installing Components
- Recommended Tools
- Internal View
- Removing the Base Cover
- Installing the Base Cover
- Removing the Battery
- Installing the Battery
- Removing the Front Camera
- Installing the Front Camera
- Removing the Speakers
- Installing the Speakers
- Removing the Docking Board
- Installing the Docking Board
- Removing the System Board
- Installing the System Board
- Removing the Rear Camera
- Installing the Rear Camera
- Removing the Coin-Cell Battery
- Installing the Coin-Cell Battery
- Removing the Volume-Button Board
- Installing the Volume-Button Board
- System Setup
- Troubleshooting Your Computer
- Specifications
- Contacting Dell
![](/manual/dell/10-st2e/laptop-user-manual/images/img-12.png)
4. Remove the screws that secure the docking board to the computer.
5. Remove the docking board from the computer and disconnect the home-button board cable.
Installing the Docking Board
1. Connect the home-button board cable to the docking board and place the docking board in its slot in the computer.
2. Tighten the screws to secure the docking board to the computer.
3. Connect the docking-board power cable to the connector.
4. Install the:
a) front camera
b) speaker
c) battery
d) base cover
5. Follow the procedures in
After Working Inside Your Computer
.
15