Deployment Guide

Deployment Guide 13
CAUTION: Do not leave the administrator password blank.
NOTE: To configure the public network properly, the computer name and
public host name must be identical.
NOTE: Record the password that you created in this step. You will need this
information in step 14.
When the installation procedure completes, the Welcome to Windows
window appears.
12 Shut down the system, reconnect all external storage devices, and restart
the system.
13 In the Welcome to Windows window, press <Ctrl><Alt><Delete> to
continue. The
Log On window appears.
14 In the Password field, enter the administrator password that you created in
step 11
in this procedure and click OK . You will be prompted to insert the
Windows Server CD2. You can insert the Windows Server CD2 or select
Cancel .
NOTE: If you insert the Windows Server CD2, follow the prompts through the
normal installation process. The following process assumes you are not inserting
the Windows Server CD2.
15 Select Cancel . You will be prompted that media on Windows Server CD2
will not be installed.
16 Select OK . You will be prompted to configure Windows Server Post-Setup
(optional).
17 Select Finish . You will be prompted to close the page.
18 Select Yes . The Manage Your Server windows management window
displays.
19 Close the window.
NOTE: To use the Broadcom Advanced Control Suite 3 (BACS), install Microsoft
.NET Framework 2.0. The Microsoft .NET Framework 2.0 can be downloaded from
www.microsoft.com
Installing the Resource CD:
20 Insert the CD labeled Dell RCD x64 4.0 .
21 Go to My Computer and double-click your CD-ROM drive.