Deployment Guide

Deployment Guide 27
f In the Properties window, click Close .
g Repeat step a through step f for the Private NIC team.
NOTE: Private NIC team does not require a default gateway address and DNS
server entry.
3 Ensure that the public and private network adapters appear in the
appropriate order for access by network services.
a On the Windows desktop, click Start → Settings → Control Panel →
Network Connections .
b In the Network Connections window, click Advanced and select
Advanced Settings .
c Select the Adapter and Bindings tab.
d Ensure that the network adapters are listed in the following order:
Public
Private
<Any other network adapter>
NOTE: Click the up- and down- arrows to change the adapter order.
e
Click OK .
f Close the Network Connections window.
4 On all nodes, add the public, private, and virtual IP addresses and host
name to the
%SystemRoot%\system32\drivers\etc\hosts
file.
NOTE: Add the public and virtual IP addresses to the hosts file only if they are
not registered with the DNS server.
For example, the following entries use the adapter IP and host name as
shown in Table 1-7:
IP AddressNode Name
155.16.170.1rac1
155.16.170.2rac2
10.10.10.1rac1-priv
10.10.10.2rac2-priv