Deployment Guide

30 Deployment Guide
NOTE: For more information, see the EMC PowerPath documentation that
came with your Dell|EMC storage system.
2 When the installation procedure is complete, restart your system.
3 Repeat step 1 and step 2 on the remaining nodes.
Installing Multi-Path driver software for MD3000
1 On node 1, install the Multi-Path driver software from the PowerVault
MD3000 Resource
CD.
NOTE: For more information, see the documentation that came with your Dell
MD3000 storage system.
2 When the installation procedure is complete, restart your system.
3 Repeat step 1 and step 2 on the other node.
Verifying Multi-Path Driver Functionality
1 Right-click My Computer and select Manage .
2 Expand Storage and click Disk Management . One disk appears for each
LUN assigned in the storage.
3 Ensure that each LUN is configured as a Basic disk.
4 Repeat step 1 through step 3 on the remaining nodes.
Preparing the Disks for Oracle Clusterware
This section provides information for creating the logical drives for the
following disks:
• Oracle Cluster Registry (OCR) disk — Contains the cluster configuration
information
• Voting disk — Provides arbitration between the cluster nodes when the
private network or attached storage is unavailable to one or more nodes
• Data and backup disks — Provide storage areas for creating the database
(data disk) and saving the backup and log data (backup disk)
During the cluster configuration described in this document, you will create
partitions on your shared storage. When you create the partitions, ensure that
the cluster nodes can detect the LUNs or logical disks that are created in the
attached storage system.