Deployment Guide

52 Deployment Guide
For example, FLASH .
b In the Redundancy box, select External .
c Click Stamp disks .
d In the Select disks screen, select the disk which you plan to use for the
Flash Recovery Area. Note that the
Status is marked as Candidate
device
.
e In the Generate stamps with this prefix field, enter FLASH , and click
Next .
f In the Stamp disks window, click Next .
g Click Finish to save your settings.
h Select the check boxes next to the available disks and click OK .
The
ASM Disk Group Window appears, indicating that the software is
creating the disk group.
When completed, the FLASH disk group appears in the
Disk Group
Name
column.
17 Select only the Disk Group Name that you assigned to the database in
step 15 (for example, +DATABASE/) and click
Next .
18 In the Database File Locations window, select Use Oracle-Managed Files
and
Multiplex Redo Logs and Control Files and click Next .
19 In the Recovery Configuration window, perform the following steps:
a Select Specify Flash Recovery Area .
b Click Browse .
c Select the FLASH disk group that you created in step 17 and click OK .
d In the Flash Recovery Area Size text box enter the total size of the
flash disk group created in step 17.
e Select Enable Archiving .
f Click Edit Archive Mode Parameters .
g In the Edit Archive Mode Parameters window, ensure that the path
listed under the
Archive Log Destinations is as follows: +FLASH /,
where
FLASH is the Flash Recovery Area disk group name that you
specified in step a of step 17.