Deployment Guide
Deployment Guide 61
6
Delete the symlinks for the OCR (
OCRCFG
and
OCRMIRRORCFG
)
and the voting disks (V
otedsk1, Votedsk2,
and
Votedsk3
).
a
Select
OCRCFG, OCRMIRRORCFG
,
Votedsk1
,
Votedsk2, and
Votedsk3
.
b
Click
Options
and select
Commit
.
If successful, the
OCRCFG, OCRMIRRORCFG
,
Votedsk1
,
Votedsk2, and Votedsk3
entries disappear.
c
Click
Options
and select
Exit
to close the Oracle Object Manager.
7
Launch the Computer Management Console.
a
On the Windows desktop, click
Start
→
Run
.
b
In the
Run
field, enter the following:
compmgmt.msc
The
Computer Management Console window
appears.
8
Delete the ASM partitions.
a
In the
Computer Management Console
window, click
Storage
and
select
Disk Management
.
b
Right-click the first partition and select
Delete Logical Drive
.
c
When prompted, click
Yes
.
d
Repeat step b and step c for each remaining partition until all
partitions, including the original extended partition, have been
deleted.
9
Restart node 1 and log in as administrator.
10
After you are logged in as administrator on node 1, restart each of the
remaining nodes and log in as administrator.
11
Repeat the procedures "Preparing the Disks for Oracle Clusterware" on
page 29 and "Removing the Assigned Drive Letters" on page 33 to recreate
your logical partitions and the procedure, "Installing Oracle RAC 10g R2
Using ASM" on page 33 to re-install Oracle RAC for ASM.
Additional Troubleshooting
This section provides recommended actions for additional problems that you
may encounter.