Deployment Guide
Deployment Guide 13
CAUTION: Do not leave the administrator password blank.
NOTE: To configure the public network properly, the computer name and
public host name must be identical.
NOTE: Record the logon password that you created in this step. You will need
this information in step 14.
When the installation procedure completes, the
Welcome to Windows
window appears.
12
Shut down the system, reconnect all external storage devices, and restart the
system.
13
In the
Welcome to Windows
window, press <Ctrl><Alt><Delete> to
continue. The
Log On
window appears.
14
In the
Password
field, enter the administrator password that you created in
step 11
in this procedure and click
OK
.
You are prompted to insert the
Windows Server
CD2. You can insert the
Windows Server
CD2 or select
Cancel
.
NOTE: If you insert the
Windows Server
CD2, follow the prompts through the
normal installation process. The following process assumes you are not inserting
the
Windows Server
CD2.
15
Select
Cancel;
you will be prompted that media on Windows Server CD2
will not be installed.
16
Select
OK;
you are prompted to configure Windows Server Post-Setup
(optional).
17
Select
Finish
; you are prompted to close the page.
18
Select
Yes
. The Manage Your Server windows management window
displays.
19
Close the window.
NOTE: To use the Broadcom Advanced Control Suite 3 (BACS), install Microsoft
.NET Framework 2.0. The Microsoft .NET Framework 2.0 can be downloaded from
www.microsoft.com.
Installing the Resource CD:
20
Insert the CD labeled
Dell RCD x64 v4.0
.
21
Go to
My Computer
and double click your CD-ROM drive.