Owner`s manual

Replacing the Display Cable

WARNING: Before working inside your computer, read the safety

information that shipped with your computer and follow the steps in

Before Working Inside Your Computer. After working inside your

computer, follow the instructions in After Working Inside Your

Computer. For more safety best practices, see the Regulatory

Compliance home page at dell.com/regulatory_compliance.

Procedure

1 Route the display cable through the routing guides on the display bezel.

2 Slide the display cable into the connector on the touch board and press

down the latch to secure the cable.

3 Slide the Windows-button board cable into the connector on the

Windows-button board and press down the latch to secure the cable.

4 Adhere the adhesive tape on the Windows-button board connector.

Post-requisites

1 Replace the display back-cover and antenna assembly.

2 Replace the display assembly.

3 Replace the camera.

4 Replace the battery.

5 Replace the base cover.