Laptop User Manual


10. Lift the palm rest bracket off the computer base.
Replacing the Palm Rest Bracket

1. Follow the procedure in Before You Begin.

2. Place the palm rest bracket on the computer base.

3. Replace the four screws that secure the palm rest bracket to the computer base.

4. Connect the power button cable to the system board connector.

5. Turn the computer over and replace the four screws that secure the palm rest bracket to the computer base.

6. Replace the hard drive (see Replacing the Hard Drive).

7. Replace the speakers (see Replacing the Speakers).

8. Replace the palm rest (see Replacing the Palm Rest).

9. Replace the keyboard (see Replacing the Keyboard).

10. Replace the battery (see Replacing the Battery).

Back to Contents Page

1
power button cable
2
screws (4)
3
palm rest bracket


CAUTION: Before turning on the computer, replace all screws and ensure that no stray screws remain inside the computer. Failure to do so may
result in damage to the computer.