Users Guide

www.dell.com | support.dell.com
276 Using Your Projector
Computer Image Menu
NOTE: This menu is only available connected to a computer.
F
REQUENCY—Change the display data clock
frequency to match the frequency of your
computer graphics card. If you see a vertical
flickering bar, use Frequency control to
minimize the bars. This is a coarse adjustment.
T
RACKING—Synchronize the phase of the
display signal with the graphics card. If you
experience an unstable or flickering image, use
the Tracking to correct it. This is a fine
adjustment.
NOTE: Adjust the Frequency first and then the Tracking.
H
OR. POSITION— Press the button on the control panel or the  button on the
remote control to adjust the horizontal position of the image to the left and press the
button the control panel or the
 button on the remote control to adjust the
horizontal position of the image to the right.
VER. POSITION— Press the button on the control panel or the  button on the
remote control to adjust the vertical position of the image down and press the
button the control panel or the
 button on the remote control to adjust the vertical
position of the image up.
Video Image Menu
NOTE: This menu is only available with S-video, Video (composite) signal
connected.
S
ATURATION—Press the button on the
control panel or the
 button on the remote
control to decrease the amount of color in the
image and press the
button the control
panel or the
 button on the remote control
to increase the amount of color in the image.
S
HARPNESS— Press the button on the control
panel or the
 button on the remote control to
decrease the sharpness and press the button
the control panel or the
 button on the remote control to increase the sharpness.