Users Guide

Troubleshooting Your Projector 281
The image is streched when
displaying a 16:9 DVD
The projector automatically detects 16:9 DVD
and adjusts the aspect ratio to full screen with
a 4:3 (letter-box) default setting. If the image is
still stretched, adjust the aspect ratio as
follows:
• If you are playing a 16:9 DVD, select 4:3
aspect ratio type on your DVD player (if
capable).
• If you cannot select 4:3 aspect ratio type on
your DVD player, select 4:3 aspect ratio in the
All Images menu in the OSD.
Image is reversed Select Management from the OSD and adjust
the projecton mode.
Lamp is burned out of makes a
popping sound
When the lamp reaches its end of life, it may
burn out and may make a loud popping sound.
If this occurs, the projector does not turn back
on, and displays Lamp Defective in the
LCD display until the lamp is replaced. To
replace the lamp, see "Changing the Lamp" on
page 282.
The remote control is not
operating smoothly or in very
limited range
The battery may be low. If so, replace it with 2
new AAA batteries.
OSD display window does not
appear on the screen after
pressing the Menu button on
the remote control or on
control panel
Try the following procedures:
1 Press the Menu button on the remote control
or on the control panel for 15 seconds until
OSD pops up.
2 Select Management from the OSD.
3 Set OSD Lock to "Off" .
Problem (continued) Possible Solution (continued)