User guide
Table Of Contents
- Before Beginning
- Setting Up Printer (Printer Setup)
- Using Your Printer
- Print Media Guidelines
- Loading Print Media
- Operator Panel
- Printing
- Know Your Printer
- Maintaining Your Printer
- Troubleshooting
- Troubleshooting
- Basic Printer Problems
- Display Problems
- Printing Problems
- Print Quality Problems
- The output is too light
- Toner smears or print comes off/Stain on back side
- Random spots/Blurred images
- The entire output is blank
- Streaks appear on the output
- Pitched color dots
- Vertical blanks
- Mottle
- Ghosting
- Fog
- Bead-Carry-Out (BCO)
- Auger mark
- Wrinkled/Stained paper
- The top margins is incorrect
- Color registration is out of alignment
- Protrudent / Bumpy paper
- Noise
- Jam
- Other Problems
- Contacting Service
- Troubleshooting
- Appendix
- Index
128 Maintaining Your Printer
The color registration chart is printed.
Determining Values
On the color registration chart printed, find the straightest lines where the
two black lines and the colored line are most closely aligned for each color (Y,
M, and C).
If you find the straightest line, make a note of the value (-5 - +5) indicated by
the straightest line for each color.
When the value is 0 for each color, you do not need to adjust the color
registration.
When the value is not 0, enter the value according to the procedure in
"Entering Values" on page 129.