Owner`s manual

40 I/O Board
Removing the I/O Board
1
Remove the screw that secures the I/O board to the palm-rest assembly.
2
Lift the I/O board off the palm-rest assembly.
Replacing the I/O Board
1
Align the screw holes on the I/O board with the screw holes on the
palm-rest assembly.
2
Replace the screw that secure the I/O board to the palm-rest assembly.
1 I/O board 2 screw
21
OM_Book.book Page 40 Tuesday, September 25, 2012 2:30 PM