Owner`s manual
Table Of Contents
- Before Working Inside Your Computer
- After Working Inside Your Computer
- Removing the Base Cover
- Replacing the Base Cover
- Removing the Power-Light Board
- Replacing the Power-Light Board
- Removing the Battery
- Replacing the Battery
- Removing the Speakers
- Replacing the Speakers
- Removing the Wireless Card
- Replacing the Wireless Card
- Removing the Solid-State Drive
- Replacing the Solid-State Drive
- Removing the Heat Sink
- Replacing the Heat Sink
- Removing the Fan
- Replacing the Fan
- Removing the Power-Adapter Port
- Replacing the Power-Adapter Port
- Removing the I/O Board
- Replacing the I/O Board
- Removing the System Board
- Replacing the System Board
- Removing the Coin-Cell Battery
- Replacing the Coin-Cell Battery
- Removing the Display Assembly
- Replacing the Display Assembly
- Removing the Keyboard
- Replacing the Keyboard
- Removing the Palm-Rest Assembly
- Replacing the Palm-Rest Assembly
- System Setup
- Flashing the BIOS
Replacing the Base Cover | 11
Replacing the Base Cover
WARNING: Before working inside your computer, read the safety information
that shipped with your computer and follow the steps in
"Before Working Inside
Your Computer" on page 7. After working inside your computer, follow the
instructions in "After Working Inside Your Computer" on page 9.
For more safety best practices, see the Regulatory Compliance home page at
dell.com/regulatory_compliance.
Procedure
1 Align the base cover with the palm-rest assembly and press the base cover
into place.
2 Using a Torx 5 screwdriver, replace the screws that secure the base cover to the
palm-rest assembly.