Service manual

5 Peel off the tape on the Windows-button board connector, lift the latch

and disconnect the Windows-button board cable from the system board.

1 antenna cables (2) 2 screws (2)

3 display-cable bracket 4 display cable

5 Windows-button board

cable

6 tape

7 wireless card

6 Turn the computer over and open the display as far as possible.

CAUTION: Place the computer on a soft and clean surface to avoid

scratching the display.

7 Place the computer face down on a flat surface.

8 Peel off the tape that secures the display cable to the computer base.

9 Remove the screws that secure the display assembly to the computer

base.