Users Guide

back to contents page
Loading Print Media

Loading print media properly helps prevent jams and ensures trouble-free printing.

Before loading print media, identify the recommended print side of the print media. This information is usually on the print media package.
Tray 1
Loading Print Media in Tray 1
Single Sheet Feeder
Loading the Single Sheet Feeder
Using the Single Sheet Feeder
Using the Manual Duplex Function
Manual Duplex Printing from Tray 1
Manual Duplex Printing From the Single Sheet Feeder
Using the Output Tray
Using the Output Tray Extension
Tray 1
Capacity

Tray 1 can hold:

l 250 sheets of the standard paper.
Print Media Dimensions

Tray 1 accepts print media within the following dimensions:

l Width - 76.2 mm (3.00 inches) to 220.0 mm (8.66 inches)

l Length - 127 mm (5.00 inches) to 355.6 mm (14.00 inches)
Loading Print Media in Tray 1
1. Remove the paper tray from the printer.

NOTE: To avoid paper jams, do not remove the tray while a printing is in progress.
NOTE: Use only laser print media. Do not use ink jet paper in the printer.