Users Guide

Purpose:

To print various types of reports and lists.

The reports are printed in the paper size specified in Printer Settings. The default is A4 or Letter.

Values:

TCP/IP Settings

Purpose:

To display the current settings of TCP/IP (Transmission Control Protocol/Internet Protocol) protocol.

Values:

Printer Maintenance

The Printer Maintenance tab includes the System Settings, Paper Density, Adjust BTR, Adjust Fuser, Registration Adjustment, Adjust Altitude, Reset
Defaults, Non-Dell Toner, Initialize PrintMeter, Web Link Customization, TCP/IP Settings, EWS, and Set Password pages.
System Settings

Purpose:

To configure the basic printer settings.

Values:

Printer Settings
Click the Start (1) button to print the printer settings page.
Device Settings
Click the Start (2) button to print the detailed settings page.
Job History
Click the Start (3) button to print the job history report.
Error History
Click the Start (4) button to print the error history report.
Color Test Page
Click the Start (5) button to print the color test page.
IP Address Mode
Displays the settings for the IP address.
IP Address
Displays the printer's IP address.
Subnet Mask
Displays the subnet mask.
Gateway Address
Displays the gateway address.
NOTE: Values marked by an asterisk (*) are the factory default menu settings.
Power Saver
Timer Mode 1
*1
1-30 min
Specifies the amount of time before the printer enters the Power Saver Timer Mode 1 (sleep mode) after a print
job is complete.
3 min*