Users Guide

Initialize PrintMeter

Purpose:

To initialize the data for the print meter. After executing this function to automatically restart the printer, the value of the meter resets to 0.

Values:

Web Link Customization

Purpose:

To configure the link used for ordering supplies.

Values:

TCP/IP Settings

Purpose:

To specify the TCP/IP settings for the network.

Values:

Non-Dell Toner
Off*
Disables the use of refilled toner cartridges.
On
Enables the use of refilled toner cartridges.
Apply New Settings
After you complete the settings, press the Apply New Settings button to apply the changes.
Restart printer to apply new settings
Press the Restart printer to apply the new settings button to apply the changes.
Initialize PrintMeter
Click Start to initialize the print meter.
Select Reorder URL
Specifies the URL that Order Supplies at links to in the left frame of the Dell Printer Configuration Web Tool.
Regular*
accessories.us.dell.com/sna
Premier
premier.dell.com
Apply New Settings
After you complete the settings, press the Apply New Settings button to apply the changes.
Restart printer to apply new settings
Press the Restart printer to apply the new settings button to apply the changes.
IP Address Mode
AutoIP*
Automatically sets the IP address.
DHCP
Uses DHCP to set the IP address.
BOOTP
Uses BOOTP to set the IP address.
RARP
Uses RARP to set the IP address.
Manually Set
Manually sets the IP address.
IP Address
Sets the IP address allocated to the printer.
Subnet Mask
Sets the subnet mask.
Gateway Address
Sets the gateway address.