Users Guide

Jam/Alignment




Misfeed jam

5. Is the noise from Main Motor Operation Check
matched?
Yes. Contact Dell.
The job prints, but the top and side margins are incorrect.
1. Ensure the margins are set correctly in your software
program.
Color registration is out of alignment.
Do either of the following:
1. Click the Tool Box button.
2. Press the Start button for Color Regi Chart.
Is the problem recovered?
Yes. The task is complete.
No. Try the spare PHD unit, if possible.
1. Replace the PHD unit. See "Replacing the PHD (Print
Head Device) Unit" and "Installing the PHD Unit".
2. After you replace the PHD unit, click the Tool Box
button.
3. Press the Start button for Auto Correct.
Is the color chart matched with the error paper?
Yes. The PHD unit is old or damaged. Replace the PHD unit.
See "Replacing the PHD (Print Head Device) Unit" and
"Installing the PHD Unit".
No. Press the Start button for Color Regi Chart.
Is the color chart matched with the error paper?
Yes. The task is complete.
No. Check the offset value shown in the printed chart, and
then specify each value for Color Registration
Adjustment1(Lateral)andColorRegistration
Adjustment2(Process)andthenpresstheStartbuttonfor
Color Regi Chart.
Is the color chart matched with the error paper?
Yes. The task is complete.
No. Contact Dell.
Contact Dell.