Users Guide

Understanding the Printer Menus 395
mm/inch
Purpose:
To specify the measurement unit displayed after the numeric value on the
operator panel.
Va lu es :
NOTE: The default for mm/inch varies depending on country-specific factory
default.
Auto Log Print
Purpose:
To automatically print a job history report after every 20 jobs.
Va lu es :
NOTE: The job history report can also be printed using the Report List
menu.
NOTE: If more than 20 jobs are in the queue, the job history may be cleared.
Low Toner Alert Msg
Purpose:
All Tones Off Disables all the alert tones.
Low Sets the volume of all the alert tones at once.
Medium*
High
Millimeters
(mm)
Specifies the default measurement unit.
Inches (")
Off* Does not automatically print a job history report.
On Automatically prints a job history report.