Users Guide

Troubleshooting 485
Ghosting
Action Yes No
1 Adjust the transfer bias.
1 Launch the Tool Box, and click Chart Print on
the
Diagnosis tab.
2 Click the Ghost Configuration Chart button.
The ghost configuration chart is printed.
3 Launch the Tool Box, and click BTR Refresh
Mode on the Printer Maintenance tab.
4 Check the check box next to On , and then
click Apply New Settings .
5 Click Chart Print on the Diagnosis tab.
6 Click the Ghost Configuration Chart button.
The ghost configuration chart is printed.
Is the problem recovered?
The task is
complete.
Go to action 2.
2 The print media surface may be uneven. Try
changing the Paper Type setting in the printer
driver. For example, change the plain paper to
thick.
1 On the Paper/Output tab in Printing
Preferences
of the printer driver, change the
Paper Type setting.
Is the problem recovered?
The task is
complete.
Go to action 3.