Owner`s manual

Replacing the Base Cover | 11
Replacing the Base Cover
WARNING: Before working inside your computer, read the safety information
that shipped with your computer and follow the steps in
"Before Working Inside
Your Computer" on page 7. After working inside your computer, follow the
instructions in "After Working Inside Your Computer" on page 9.
For more safety best practices, see the Regulatory Compliance home page at
dell.com/regulatory_compliance.
Procedure
1 Slide the tabs on the base cover into the palm-rest assembly and snap the base
cover into place.
2 Replace the screws that secure the base cover to the palm-rest assembly.
3 Tighten the captive screws that secure the base cover to the palm-rest assembly.
4 Turn the computer over, open the display, and turn on the computer.