Owner`s manual

22 | Removing the Power-Adapter Port

Removing the Power-Adapter Port

WARNING: Before working inside your computer, read the safety information

that shipped with your computer and follow the steps in

"Before Working Inside

Your Computer" on page 7. After working inside your computer, follow the

instructions in "After Working Inside Your Computer" on page 9.

For more safety best practices, see the Regulatory Compliance home page at

dell.com/regulatory_compliance.

Prerequisites

1 Remove the base cover. See "Removing the Base Cover" on page 10.

2 Remove the battery. See "Removing the Battery" on page 12.

Procedure

1 Peel off the tape that secures the display cable to the system board.

2 Disconnect the display cable from the system board.

1 display cable 2 tape