Specifications

6
Quick Disconnect (QD) Connector
Latitude fully rugged products come equipped with receptacles for QD (Quick-
Disconnect) connectors at the corners. These receptacles allow the connection of
optional accessories such as shoulder straps.
Installing a QD connector
1. Perform the following steps to install a QD connector:
a) Align the QD connector to the receptacle on the corner of the computer.
b) Press and hold the button on top of the QD connector.
2. Insert the connector into the receptacle while holding the button pressed.
3. Release the button after the connector is seated in the receptacle to secure it.
Removing a QD connector
1. Press and hold the button on top of the QD connector.
2. Pull the connector out of the receptacle while holding the button pressed.
23