Owner`s manual

Installing the eDP cable

1. Fix the eDP cable in its place on the display assembly.

2. Connect the eDP cable to its connector.

3. Install the:

a. display panel

b. display bezel

c. display assembly

d. display-hinge brackets

e. palmrest

f. keyboard

g. keyboard trim

h. hard-drive assembly

i. memory

j. battery

k. base cover

4. Follow the procedures in After Working Inside Your Computer.

Removing the Coin-Cell Battery

1. Follow the procedures in Before Working Inside Your Computer.

2. Remove the:

a. base cover

b. battery

c. memory

d. hard-drive assembly

e. keyboard trim

f. keyboard

g. palmrest