Owner`s manual

15. wireless-status light 16. battery-status light

17. hard-drive activity light 18. power-status light

19. speakers 20. touchpad

21. smart-card reader (optional) 22. headset connector

23. security-cable slot 24. dock connector (optional)

25. Service-Tag label

Removing the SD Card

1. Follow the procedures in Before Working Inside Your Computer.

2. Press in on the SD card to release it from the computer.

3. Slide the SD card out of the computer.

Installing the SD Card

1. Push the SD card into its slot until it clicks into place.

2. Follow the procedures in After Working Inside Your Computer.

Removing the Base Cover

1. Follow the procedures in Before Working Inside Your Computer.

2. Perform the following steps to remove the base cover from the computer:

a. Remove the screws that secure the base cover to the computer.

b. Lift the base cover from its edge and remove the base cover from the computer.