Owner`s manual

c. Lift the hard drive upwards from the computer [3].

Installing the Hard Drive

1. Slide the hard drive into the connector.

2. Tighten the screw to secure it to the chassis.

3. Install:

a. access panel

b. battery

4. Follow the procedures in After Working Inside Your computer.

Removing the Memory Module

1. Follow the procedures in Before Working Inside Your Computer.

2. Remove:

a. battery

b. access panel

3. Pry the securing clips away from the memory module until it pops up.

4. Remove the memory module from its socket on the system board.