Datasheet

PowerEdge T410 Technical Guidebook

Dell

Table 6. T410 ePPID Descriptions and Locations

COMPONENT DESCRIPTION STORAGE LOCATION

Planar PWA, PLN, SV, DELL, R410 iDRAC FRU

4" x 2.5" Backplane PWA, BKPLN, SV, R410, 2.5SASX4 SEP

4" x 3.5" Backplane PWA, BKPLN, SV, R410, 3.5SASX4 SEP

500W T410 Rdnt PSU

PWR SPLY,500W,RDNT, DELTA PSU Microcontroller

PWR SPLY,500W,RDNT,EMERSON PSU Microcontroller

T410 PDB ASSY,PWA,PDB,R410 Microcontroller

Storage Card Description Storage Location

PERC 6/I Adapter ASSY, CRD, PERC6I-ADPT, SAS FRU

PERC 6/E External PWA, CTL, PCIE, SAS, PERC6/E,ADPT FRU

SAS 6/iR integrated PWA, CTL, SAS, SAS6/IR, INTG FRU

6 Power, Thermal, and Acoustic

6.1 Power Supplies

The standard PowerEdge T410 tower server includes a single 525 W power supply. This power supply

unit provides power to the T410 planar, the four internal hard drive bays, and the two 5.25” external

drive bays. The T410’s power is soft-switched, allowing power cycling via a switch on the front of the

system enclosure or via a software control (through server management functions). This power system

is compatible with industry standards, such as ACPI and Server 2000.

The T410 is powered by the standard non-redundant 525 W (Dell P/N C488 K) power supply or by two

redundant 580 W (Dell P/N D888J) power supplies with PDB (power distribution board, Dell P/N

M720J).

Figure 27 shows the 525W non-redundant PSU (Dell P/N C488 K), Figure 28 show the 580 W

redundant PSU (Dell P/N D888J), Figure 29 shows the PDB (power distribution board, Dell P/N

M720J).

Figure 27. Rear ISO View of Non-redundant PSU (Dell P/N C488 K)