Datasheet

PowerEdge T410 Technical Guidebook
24
Dell
Figure 28. Rear ISO View of Redundant PSU (Dell P/N D888J)
Figure 29. Rear ISO View of PDB (Dell P/N M720J)
6.2 Power Supply Specifications
The PowerEdge T410 power supplies have the following capacity:
There are two separate power supply connectors on the PowerEdge T410 planar: an ATX connector
(2x12) and a 2x4 connector to provide an additional two pins for +12V. (The connector Pin definition is
not ATX standard, it defined by power rating calculation.)
The 2x12 connector provides 3.3V, 5V, 12V and 5V standby to the system. The 3.3V standby to system
is generated from 5V standby.