Datasheet
PowerEdge T410 Technical Guidebook
36
Dell
The R410/T410 BIOS does not support the following:
• Embedded Diagnostics (embedded in MASER)
• BIOS language localization
• BIOS recovery after bad flash (but can be recovered from iDRAC6 Express)
10.2 Supported ACPI States
The PowerEdge T410 processor supports the following C-States: C0, C1, C1E, C3, and C6. R410/T410
supports all of the available C-States.
The PowerEdge R410 and PowerEdge T410 support the available P-States as supported by the
specific Intel 5500 processors.
Table 13. Supported P-States
Proc
Number
QDF#
Frequency
(GHz)
P-State
Turbo Mode Freq
(Ghz)
Stepping
– – 1.60 Pmin+0 – –
– – 1.73 Pmin+1 – –
E5502 Q1G8 1.86 Pmin+2 N/A D-0
E5504 Q1GM 2.00 Pmin+3 N/A D-0
L5506 Q1HG 2.13 Pmin+4 N/A D-0
E5506 Q1GL 2.13 Pmin+4 N/A D-0
L5520 Q1GN 2.26 Pmin+5
4C/3C: 2.4
2C/1C: 2.53
D-0
E5520 Q1GR 2.26 Pmin+5
4C/3C: 2.4
2C/1C: 2.53
D-0
E5530 Q1GK 2.40 Pmin+6
4C/3C: 2.53
2C/1C: 2.66
D-0
E5540 Q1G2 2.53 Pmin+7
4C/3C: 2.66
2C/1C: 2.8
D-0
X5550 Q1GJ 2.66 Pmin+8
4C/3C: 2.93
2C/1C: 3.06
D-0
X5560 Q1GF 2.80 Pmin+9
4C/3C: 3.06
2C/1C: 3.20
D-0
X5570 Q1G9 2.93 Pmin+10
4C/3C: 3.20
2C/1C: 3.33
D-0
10.3 11G BIOS Power Management
The PowerEdge T410 Platform supports Performance/Power Page in the BIOS configuration GUI.
These BIOS features are consolidated into a single page. The BIOS also provide user-friendly Power
Profiles that adjust various BIOS settings.
Some of the power management settings can be grouped together. A group of a set of different
parameters is called power profile. In total, the PowerEdge T410 BIOS setup provides five options: OS