Service manual

Dell 1707FPc

3.3 Adjusting the Picture

NOTE: If you change the settings and then either proceed to another menu, or exit the OSD menu, the

monitor automatically saves those changes. The changes are also saved if you change the settings and then

wait for the OSD menu to disappear.

Main Menu for Analog (VGA) Input Main Menu for Digital (DVI) Input

NOTE: Positioning and Image Settings are only available when you are using the analog (VGA)

connector.

1. Push the MENU button to open the OSD menu and display the main menu.

2. Push the - and + buttons to move between the setting options. As you move from one icon to another,

the option name is highlighted. See the table below for a complete list of all the options available for the

monitor.

3. Push the MENU button once to activate the highlighted option.

4. Push - and + button to select the desired parameter.

5. Pus h MENU to enter the slide bar and then use the - and + buttons, according to the indicators on the

menu, to make your changes.

6. Push the MENU button once to return to the main menu to select another option or push the MENU button

two or three times to exit from the OSD menu.