Service manual

Dell 1707FPc
14
Blue Preset
Red Preset
Normal
Preset
User Preset
The color hue is most noticeable in areas of white.
• Blue Preset is selected to obtain a bluish tint. This color setting is
typically used for text based applications (spreadsheets, programming,
text editors, etc.).
• Red Preset is selected to obtain a redder tint. This color setting is
typically used for color-intensive applications (photograph image editing,
multimedia, movies, etc.).
• Normal Preset is selected to obtain the default (factory) color settings.
This setting is also the “sRGB” standard default color space.
• User Preset: Use the plus and minus buttons to increase or decrease
each of the three colors (R, G, B) independently, in single digit
increments, from 0 to 100.
OSD
Settings:
Horizontal
Position
Vertical
Position
OSD Hold
Time
Adjust the settings for the OSD, including the location, the amount of time the
menu remains on-screen, and the rotation of the OSD.
Position of the OSD:
• To adjust the horizontal position of the OSD, use the - and + buttons, and
move OSD to the left and right.
• To adjust the vertical position of the OSD, use the - and + buttons, and
move OSD down and up.
OSD Hold Time:
The OSD stays active for as long as it is in use. Adjusting the hold time, sets the
length of time the OSD remains active after the last time you pressed a button.
Use the - and + buttons to adjust the slider in 5 second increments, from 5 to 60
seconds.
OSD Lock:
Controls user access to adjustments. When Yes (+) is selected, no user
adjustments are allowed. All buttons are locked except the menu button.