Service manual

Dell 1707FPc

NOTE: When the Dell Soundbar is not properly connected to the

monitor, the audio menu is not available.

Factory

Reset:

Reset the OSD menu options to the factory-preset values.

Exit — Select to exit out of Reset to Factory Settings menu without resetting

any OSD options.

Position settings only — Change the settings for Image Position back to

original factory settings.

Color settings only — Change the Red, Green, and Blue settings

back to their original factory settings and set the default setting

for Normal Preset.

All settings — Change all the user-adjustable settings including color, position,

brightness, contrast and OSD hold time to the factory defaults. The language of

the OSD does not change.

OSD Warning Messages

One of the following warning messages may appear on the screen indicating that the monitor is out of

synchronization.

1. Analog Input

Cannot Display This Video Mode

Optimum Resolution 1280 x1024 60Hz

2. Digital Input

Cannot Display This Video Mode

Optimum Resolution 1280 x1024 60Hz

This means that the monitor cannot synchronize with the signal that it is receiving from the computer. Either

the signal is too high or too low for the monitor to use. See Specifications for the Horizontal and

Vertical frequency ranges addressable by this monitor. Recommended mode is 1280 X 1024 @ 60Hz.