Service manual

Dell 1707FPc

8. Mechanical Instruction

Tools: 2 Power screwdrivers (φ=5mm,L=60mm); 1 small cross screwdriver; turnbuckle driver;

Setting: Power screwdriver torque A=11 kgF. Cm; torque B=6 kgF. Cm

Note: Firstly, put the monitor on a soft, flat and clean surface, wear gloves.

Fig Remark

Remove stand :

1. Rotate the stand to allow

access to the stand release

button.

2. Press the Stand release button

and lift up the Stand and away

from the monitor.

Remove bezel :

1. Remove the 4 screws by

torque A